Altiscad Intellishape ® is a general purpose biaxial bending calculation software tool, developed to design and check arbitrary geometry cross section.
The software allows to design and check the bearing capacity for any geometry cross section.
The materials for the elements are concrete, reinforced concrete, masonry, composite and also user input materials. The software permits the calculus of any type of cross section under eccentric compression loads.
Altiscad Intellishape ® is a standalone software which cooperates with Robot Structural Analysis (Robot Millennium) and also with Revit Structure. This allows the import of forces, materials and also the geometry of the element (column or structural wall).
Altiscad Intellishape ® provides the user with the following:
- Interaction curves:N/M, Mx/My
- σ-ε diagram for existing materials.
- Tension diagram σ, the unit strain diagram ε, the neutral axis position for any forces inputed.
- Calculus of the neutral axis position and verification of its position regarding the standard defined limitations.
- Calculus of geometric and static characteristics of the cross section (areas, moments of inertia, static moments, radiuses of gyration, resistance modulus etc). These proprieties are available for the whole section, and afterwards separately for the tensile and the compressed parts of the object.
Altiscad Intellishape ® is a must have tool for advanced plastic analysis of structural walls, shear walls, columns or any type of section subjected to biaxial bending with axial compression. The computation algorithm is very acurate and fast even for complex sections. The results are displayed graphical and tabular.
bz63i5vgtd
